Marble is a hard crystalline metamorphic form of natural limestone. It is found around the world and is available in a variety of stunning colours including a large range of white and lighter colours. Marble, however is much softer and more porous than granite or quartz stone and is therefore less suitable for use as kitchen worktops and bar counters etc. where it is likely to stain and mark due to heavy use. It is more suitable for bathrooms and is commonly used for vanities and shower enclosures due to its aesthetic virtues.

Granite is a very hard, granular, crystalline, intrusive igneous rock consisting mainly of quartz, mica, and feldspar. It is much harder and tougher than marble and therefore more suitable for kitchen worktops than marble. In fact due to its density and hard wearing nature it is commonly used as a construction stone for bar counters, floors, and desks and for cladding the outsides of buildings etc.

Quartz stone is a man-made material and consists approximately of 94% quartz which is a form of crystallised silicon dioxide. Like granite, because of its hard and resilient properties it is particularly suitable for use as kitchen worktops and indeed bathrooms and floors. Quartz and the darker granite stone surfaces are extremely resistant to stains and scratches. Granite and quartz stone worktops are available in wide range of colours and surface finishes. The most popular surface is a high polish because it not only looks stunning but is easier to clean and maintain especially as hygiene is of utmost importance in the kitchen. Matt (honed) and rough (anticato) finishes are also available on special order. Can I see physical samples of different materials? Yes of course, you are more than welcome to visit us at our factory showroom. If this is not possible we can arrange for samples to be sent to you. There will be a small charge for postage depending on the number of samples requested. Once you have placed your order with us you may request for us to bring some samples when our team comes to template. What should be the thickness of the worktops?

Worktops are normally manufactured in 2 cm and 3 cm thicknesses. It is a matter of personal preference and choice and very much depends on the style and size of your kitchen. Granite worktops are generally preferred in 3cm whilst quartz stone worktops in 3cm and 2cm are equally popular. The cost of worktops in 3cm will be more than the cost if manufactured in 2cm.

Whilst granite and quartz-stone is extremely hard, it can chip and even break if proper care is not taken. Please refer to our care instructions for further details.

Generally, from the time your order is placed we aim to template, manufacture and install your worktops within 10 working days. Where the material has to be especially ordered we will advise you of the lead time.

All our worktops come with a 10 year warranty for workmanship provided there is no misuse and the worktops have been properly maintained as per our care instructions. Due to the nature of some of the more crystalline materials we cannot guarantee against natural vents or stains appearing in the work surfaces. We will however advise you in advance if your chosen material is susceptible to such faults appearing with time. Please call us for further information.

We carry out the whole process which involves templating, manufacturing and fitting.

Yes, we can supply only worktops, however we recommend the fitting is carried out by our experienced fitters to avoid any mistakes and poor finishing. In the past where we have only supplied the worktops customers have called us back to remedy the worktops because they have not been happy with the fitting which was not carried out by us.

Yes, we will, however we cannot guarantee a good fit if they have not been templated and manufactured correctly.

We only use our own materials as we cannot guarantee that the material will not break during the manufacturing process which involves the use of heavy machinery and stock movement. Furthermore if the material is of a poor quality it may be susceptible to chipping easily.

Yes we do. Please send us some photos of the damaged stone so that we can assess whether it can be repaired or not. There will be a minimum callout charge depending on your location from our factory.

Whilst the majority of the manufacturing is carried out in our factory premises there may be a small amount of cutting and polishing that may need to be done on site during the fitting process. This ensures that the final product is fitted to a very high standard and finish.

We can also supply and fit replacement worktops. If you would like to keep the existing worktops until the new ones are manufactured, we can try to template over the existing ones. However it is recommended that existing worktops are removed for a more accurate template and fit. Please call us to discuss further.

If you require us to remove the existing worktops for you we can do that for you for an extra charge. We will do our very best not to damage any cabinets during the removal process but we cannot take responsibility if any damage occurs. You will need to make sure that someone is there to disconnect the plumbing, sinks and hob etc.

We take cash, card payments and online transfers. We do not accept cheques.